Controller Setup

🎮 Controller Support Instructions

• Make sure the Vigem Driver is installed.

GitHub - nefarius/ViGEmBus: Windows kernel-mode driver emulating well-known USB game controllers.GitHub

ViGEm Bus Driver - Virtual Gamepad Emulation FrameworkVigem Bus Driver

---

🔌 For PlayStation Controllers (DS4 - DS5)

DS4 Windows setup required

1. Download and install DS4 Windows

2. Open DS4 Windows and set the controller to Xbox 360 mode.

3. Unplug your controller and start the infinity Loader.

4. Once it says "Searching for cod.exe", press the END key on your keyboard.

5. Plug your controller now back into your PC.

6. Launch your Game Launcher and start Call of Duty.

7. Enter Multiplayer or Warzone, wait for the menu to pop up.

8. Navigate to the Aimbot tab, then go to the Gamepad option and enable Controller support.

9. Use the Radius option to adjust smoothing:

   • High = Rage

   • Low = Legit

---

🎮 For Xbox Controllers

No DS4 Windows setup needed

1. Unplug your controller and start the infinity Loader.

2. Once it says "Searching for cod.exe", press the END key on your keyboard.

3. Plug your controller now back into your PC.

4. Launch your Game Launcher and start Call of Duty.

5. Enter Multiplayer or Warzone, wait for the menu to pop up.

6. Navigate to the Aimbot tab, then go to the Gamepad option and enable Controller support.

7. Use the Radius option to adjust smoothing:

   • High = Rage

   • Low = Legit

---

⚙️ DS4 Setup Guide (PS Controllers)

1. Download DS4 Windows and install it

2. Complete the setup, then click Start in the bottom right.

3. Click Edit on your connected controller.

4. Go to the Other tab.

5. Set Emulated Controller to Xbox 360, then click Apply & Save.

6. (OPTIONAL, USE IF FACING ISSUES): Go to Settings and enable Hide DS4 Controller.

Make sure Emulated Controller says XBOX 360

Select the Hide DS4 Controller Option